Lightning series is the sinter blade series, for high speed general purpose application. Lightning series including Lighting General
(Segmented, Segmented Turbo and Continues Turbo) and Lightning Special (SAMURAI, Protected Continue Turbo Blades, T
Segmented Blades and Turbo Wave Blades)

1.SAMURAI Lightning Special

The famous warrior of the diamond blade industry, the Samurai is known to be one best cutting diamond blades on the market today.
Employing a slant turbo design segmented rim and deep diamond side ribs down into core, the Samurai is the ultimate fast cutting,
chip-free blade on many tough job applications. The LDZ is designed for dry cutting on high speed cut off saws and the LAZ is for wet cutting
on walk behind concrete saws. Available in 10", 12" and 14".

Segment Height 9mm (.355)     Sintered Diffusion Bonded

2.Protected Continue Turbo Lightning Special

LTPT High tech turbo blade that employs protected side segments that cut extremely well in granite, stone, concrete and other hard
materials. Diamonds on the face of the blade can be used for trimming, sanding and grinding giving better side clearance while installing
stone in tight places. Larger diameters great for granite and stone saws. Available in sizes 4" to 14".

Segment Height 10mm (.395)     Sintered Diffusion Bonded

LTTS Aggressive side protected turbo segmented blade that gives excellent deep cutting of very hard materials such as granite, stone and
concrete. Good for curved cutting with minimal chipping and clean a cutting surface are the result of this fast cutting blade. Available in
sized 4" to 14".

Segment Height 10mm (.395)   Sintered Diffusion Bonded

Premium turbo blade has a wave pattern in the core that cools the core and removes debris improving life and speed. This blade provided
excellent cutting speed on hard materials such as brick, granite, stone, tile and concrete. May be used wet or dry. Available in sized 4" to
10".

Segment Height 10mm (.395)    Sintered Diffusion Bonded